M/S Huto Music World

Name : Valve Stem
Fits : Precihole PX100 and PX 120

Precihole Air Cylinder ( Tube) Brass parts

Diana stormrider gen1/ gen2 M5 cocking Knob.

We have found these guns cocking handles have a tendency to snap off being made of a weaker non-magnetic metal.  To make matters worse getting the broken portion out of the bolt can be a nightmare.  Our handles feature tough stainless steel and should last a lifetime.  These are a direct fit for the Diana Chaser/Airbug/Bandit/Trailscout & Stormrider.  Since they just screw in/out replacing is simple.  If your old handle wont budge, remove orings, put on vice grips with rubber to protect then loosen.  NOTE when installing our handles use blue thread lock and only hand tighten to protect the bolt threads.

FX Airgun Stainless Steel Barrel Sleeves and V2 Duel Hole Transfer port.

• For Diana Stormrider PCP Air Rifle
• Add a second barrel band for added rigidity and ruggedness to your Diana Stormrider.
• Improves accuracy: Add to keep the barrel fixed to the air chamber. Something the gun needs to come with! It keeps the shots in a tighter groping.
• Easy to install: It is best to loosen the stock barrel band and the three screws that hold the barrel into the receiver and then pull the barrel out. Then put new barrel band over air reservoir and slide the barrel back in.

Additional Information:

• Delivery Time: 7 to 10 days
• Packaging Details: Huto Company

Px 100 Achilles  custom hammer spring can shots 14 grain up to 880 fps n 10.34 grain pellets 990 fps

This is a direct replacement for the FX Impact M3 / Mk3 . The full bottle connector assembly includes the 1st stage regulator also.

The 1st stage regulator within the Mk3 models is designed to reduce the pressure differential pressure from your air bottle to your 2nd stage regulator. This can be more of an issue when shooting pellets at lower regulator pressures, meaning the DP is much higher than when shooting slugs at higher regulator pressures. This can put extra strain on some regulators.

Another benefit of the 1st stage regulator is it allows a higher bottle pressure to be used upto 300barg, that some after market bottle providers supply. The 1st stage regulator reduces these pressure to below >250barg ensuring the internals of the Impact do not see a pressure that is higher than the safe design pressure.

This barrel band is made to fit the air venturi Avenger of all cal. It can be mounted in either direction. In order to mount the ar style.

The Gen2 Black Arts Design Barrel Band System is designed to reduce the POI shifts inherent in the Air Venturi Avenger and tighten its groups. We developed a 2-component system that removes the main problem, the factory barrel band. The Air Venturi Avenger factory barrel band ties the forend of the stock directly to the barrel. Any pressure applied to the forend is fed directly to the barrel via the factory barrel band. Our 2-component system divorces the forend and lower air tube from the barrel. This is accomplished through our Forend Bracket which secures the forend to ONLY the lower air tube. The Forend Bracket does not contact the upper air tube or barrel shroud. This ends the intimate relationship between the stock forend and barrel. Our Barrel Band then ties ONLY the upper air tube and barrel providing stability. These 2 components will tighten groups and drastically reduce the seemingly random POI shifts. We highly recommend the DonnyFL Avenger Extender 1/2×20 Adapter be paired with our 2 component Barrel Band System.

Support in precihole NX200 Nitro piston. (80 bar)

* Original fiber sight from Precihole Sports     *Attached to the muzzle with one set screw             *Fits Precihole SX100, VX100 & NX100              *Provide clear aimpoint & protects the muzzle

Orginal Rear Metal sight from Precihole Sports
Attached to the barrel with two set screw
Fits Precihole VX100, SX100, NX100 & NX200
Windage and elevation adjustable.

FX Maverick/Wild Cat MK3 caliber exchange kit with Duel Hole Transfer Port and High Flow Slug Probe and Pellets Probe.

Benjamin Maurader Bull pub stock including scope dovetail rail and trigger mechanism.

Wooden bull pub stock for Gare  Gm10s Air rifle including trigger mechanism and Dovtail rail.

*Diana outlaw wooden bull pub stock.
*Including 11mm(Dovtail) to 20mm(picatanny)10     inch scope rail.
* and trigger mechanism.
*Note Diana outlaw rifle  not included

Brand : Huma
Fits for: FX Impact X/ MK2/M3
Digital Mini pressure Gague
Size 28mm G1/BSP Treads
300 BAR

*Px 100 Achilles Regulator
* Internai adjustment
*Can adjust from 60 bar to 160 bar
*Plenum size 30cc

DESCRIPTION

28mm mini pressure gauge

The case is made of high-grade brass

3%FS accuracy

28mm case size, BAR unit

1/8” BSP(=G1/8) thread only.

Suitable for a working pressure of 250 bar

Px 100 bull pub wooden  stock with Dovetail  n trigger mechanism.

V2 Duel hole Transfer port and High flow slug probe or Pellets Probe

* For Diana Outlaw Heavy Hammer Spring                      * Hammer weight 121.1 grains                                         * Upgrade for people wanting to push the limit of
   Power.

Additional Information:

• Delivery Time: 7 to10 ds

FX Impact M3 bottle valve pin sleeve, its a good news now old FX mk2 bottle can be use in FX Impact M3 bottle by only putting the brass sleeve ( adaptor) on old mk2 bottle valve.

Quick disconnect fill prob for Precihole px 100

ACCESSORIES, PCP ACCESSORIES  fill probe for hp200 hand pump, fill probe for precihole px100, precihole fill probe, precihole pcp fill probe, precihole px100 fill probe, precihole sports accessories, precihole sports spare parts, px100 achilles fill probe

• FX Impact and FX Crown Gen 3 Tuning Regulator by Huma-Air

  is specially designed as a “one on one” replacement regulator for your FX Impact and FX crown. Unfortunately the fixed limited space in the FX Impact and Crown action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio’s used by FX.
  Nevertheless we have accomplished to make a great replacement regulator what will solve the know issues of the factory regulator.

  This is the Gen3 model what is compatible with factory models with 16 mm long pistons and 10 mm belleville disk springs.

   

  The benefits of the Huma-Air, FX Impact and FX Crown Gen 3 tuning regulator are:
• The recovery time in between shots is much faster compared to the factory regulator.

This first stage tuning regulator for your FX Impact M3 build by Huma-Air is specially designed to replace the factory FX first stage regulator.
As a part of the Dual Stage regulator system of the FX Impact M3 the first regulator pre-reduces the pressure in preparation for the second regulator. This provides less stress on the second regulator and achieves a more constant output pressure with less standard deviations. Advised is to use about 30-40 BAR difference between the 1st & 2nd regulator.

This regulator is a one-one one swap with the factory regulator and also allows you to unscrew or swap the pressure bottle of the rifles without de-presurizing the rifle.

Pressure can be set by turning the set-screw of the regulator what can be found inside the regulator. Half a turn counter clockwise equals to about 25-30 bar pressure increase. The set pressure can be read on the rifle’s pressure gauge.
The Huma-Air tuning regulator will ad 23 mm in length compared to the factory regulator.

Products Name : Valve Seat
Fits : Precihole PX 100 n PX 120 all series

This Safety Lock can be used for PX100 Achillese, PX100X3, PX120

Additional Information:

• Delivery Time: 7 to 10 days

Additional Information:

• Delivery Time: 7 to 10 days

The Huto High Flow pin (pellet/slug probe) for FX Impact pellet probe has a solid shaft with small tip, Minimalizing the obstruction it forms for the airflow in your FX Impact. The stainless stell Huto High Flow pin for FX Impact is often used in combination with the Huma High Flow Duel Hole FX transfer port to increase the airflow to the maximum resulting in higher velocity while maintaining accuracy.

* FX Wild Cat MK2 Slug Probe* 30% More air Flow
Fx Wild Cat mk2 Slug Probe

* Slug Probe for FX Maverick and FX Wild Cat MK3
* 30℅ More air flow